Why Is My iPhone Not Charging? 9 Fixes That Work (2026)
Short answer: Why is my iPhone not charging? The cause is almost always hardware: a dirty charging port, a damaged cable, or a weak power source. Start by inspecting the cable, cleaning lint out of the port with a wooden toothpick, and trying a different wall outlet. If the hardware is fine, a force restart or an iOS update usually fixes software-side charging glitches. If you are facing other iPhone battery issues, the iPhone battery problems hub covers the common fixes in one place.
Why Is My iPhone Not Charging? The Usual Suspects
An iPhone that refuses to charge is frustrating, but the list of possible causes is short. In roughly 8 out of 10 cases, the problem is one of three things: the cable, the port, or the power source. Software causes exist but are far less common.
| Symptom | Most likely cause |
|---|---|
| No charging icon at all | Dead cable, dead adapter, or dead outlet |
| Charges only at certain angles | Frayed cable or lint packed in the port |
| “Accessory not supported” alert | Non-certified cable or dirty connector |
| “Liquid detected” alert | Moisture in the port, charging blocked for safety |
| Stuck at 80% | Optimized charging or the 80% limit setting |
| Charges wirelessly but not with cable | Dirty or damaged port |
Work through the fixes below in order. Most people find the culprit within the first three.
Fix 1: Inspect the Cable and Adapter
Cables die quietly. Look along the full length for fraying, kinks, or discoloration near the connectors, and check that the metal contacts are clean and not bent. Then try a different cable and a different adapter, ideally ones you know work with another device.
If you use third-party accessories, make sure they are MFi certified (Made for iPhone). Cheap uncertified cables often trigger the “This accessory may not be supported” alert and can stop charging entirely. A cable that works for data transfer can still fail at delivering power, so swapping is the only real test.
Fix 2: Clean the Charging Port
This is the single most common fix. Pocket lint packs into the charging port over months until the connector can no longer seat fully, and the phone charges intermittently or not at all.
- Power off your iPhone.
- Shine a light into the port (USB-C on iPhone 15 and later, Lightning on iPhone 14 and earlier) and look for lint.
- Gently scrape the debris out with a wooden or plastic toothpick. Never use metal, it can short the pins.
- Blow out any remaining dust, then try charging again.
You will be surprised how much comes out. Do this every few months as preventive maintenance.
Fix 3: Try a Different Power Source
Wall outlets, power strips, laptop USB ports, and car chargers all deliver different amounts of power. A laptop USB port or an old 5W adapter may not provide enough current, and some power strips cut power to individual sockets.
Plug the adapter directly into a wall outlet you know works (test it with a lamp). If you were charging from a computer, switch to a wall adapter rated 20W or higher, which is what modern iPhones are designed around.
Fix 4: Force Restart Your iPhone
A software glitch can freeze the charging circuitry’s logic. A force restart clears it without touching your data.
- iPhone 8 and later (including all Face ID models): press and release Volume Up, press and release Volume Down, then press and hold the Side button until the Apple logo appears.
- iPhone 7 / 7 Plus: press and hold Volume Down and the Sleep/Wake button together until the Apple logo appears.
- iPhone 6s and earlier: press and hold Home and the Sleep/Wake (or Top) button together until the Apple logo appears.
Plug the charger back in after the restart and check for the charging icon.
Fix 5: Check for a Liquid Detection Alert
If your iPhone detects liquid in the connector, it blocks charging to prevent damage. You will see an alert like “Liquid detected” or “Charging not available.”
- Unplug the cable immediately.
- Tap the phone gently against your hand with the connector facing down to drain liquid.
- Leave it in a dry, ventilated spot for several hours. Do not use heat, compressed air, or insert anything into the port.
- Try charging again only when you are sure it is dry.
Do not override this warning with wireless charging as a workaround while the port is wet, either. Let it dry fully first.
Fix 6: Check Your Battery Charging Settings
Sometimes the phone is fine and a setting is doing exactly what it was designed to do. Go to Settings > Battery > Battery Health & Charging and check:
- 80% Limit (iPhone 15 and later): if enabled, the phone deliberately stops at 80%. Switch to Optimized or None if you need a full charge.
- Optimized Battery Charging: learns your routine and may hold the charge at 80% until you need it. This looks like “not charging” when it is actually waiting.
If your iPhone sits at 80% and will not budge, this setting is the answer nine times out of ten.
Fix 7: Remove the Case and Check Wireless Charging
If you charge wirelessly, a thick case, a metal ring holder, or a misaligned MagSafe connection can prevent charging. Remove the case and center the phone on the charger. Also check that the wireless charger itself is plugged into a proper adapter, not a low-power USB port.
If wired charging works but wireless does not, the problem is alignment or the pad, not your iPhone.
Fix 8: Update iOS
Rare, but real: a buggy iOS release can break charging behavior, and Apple fixes it in the next update. Go to Settings > General > Software Update and install anything available. Use a computer (Finder on Mac, iTunes/Apple Devices on Windows) to update if the battery is too low to update over the air.
Fix 9: Check Battery Health and Get Service
Go to Settings > Battery > Battery Health & Charging and look at Maximum Capacity. If it is under 80%, the battery is chemically worn and may behave erratically, including refusing to charge properly. Apple considers 80% the service threshold.
If none of the fixes above worked, the fault is likely hardware: a damaged port, a failed charging IC, or a dead battery. Book a Genius Bar appointment or contact Apple Support. If the phone is under warranty or AppleCare+, do not attempt any further DIY repair.
Why is my iPhone not charging when plugged in?
The most common reasons are a dirty charging port, a damaged cable, or a weak power source. Clean the port with a wooden toothpick, try a different MFi-certified cable and wall outlet, then force restart the phone.
Why does my iPhone stop charging at 80%?
That is the 80% Limit or Optimized Battery Charging doing its job to protect long-term battery health. Change it under Settings > Battery > Battery Health & Charging.
Can I use a non-Apple charger for my iPhone?
Yes, as long as it is MFi certified. Uncertified chargers can trigger accessory warnings, charge slowly, or stop working entirely, and in rare cases they can damage the phone.
Why won’t my iPhone charge wirelessly?
Usually alignment, a thick case, or a metal accessory between the phone and the pad. Remove the case, center the phone on the charger, and make sure the pad is powered by a proper wall adapter.
Is it the battery or the charging port?
If the phone charges with a different cable and adapter, it was the accessories. If it charges wirelessly but not wired, suspect the port. If nothing works and battery health is under 80%, suspect the battery.
What does the liquid detected alert mean?
Your iPhone found moisture in the charging port and blocked charging to prevent a short circuit. Unplug it, drain and air-dry the phone for several hours, and do not charge until it is fully dry.
When should I contact Apple Support?
When you have tried a known-good cable, adapter, and outlet, cleaned the port, force restarted, and updated iOS, and the phone still will not charge. That points to internal hardware failure, which needs professional service.
The Bottom Line
An iPhone that will not charge is usually a cable, port, or power problem, not a dead phone. Clean the port, swap the cable and adapter, and try a real wall outlet before assuming the worst. Software fixes like a force restart and an iOS update cover the remaining cases, and the battery health screen tells you when it is genuinely time for service. Work the list top to bottom and you will find the culprit.

One Comment